How do I setup Aervy wifi extender? 

In today's fast-paced world, a reliable and strong internet connection is essential. Whether you're working from home, streaming your favorite shows, or gaming online, a weak or spotty WiFi signal can be frustrating. Fortunately, a WiFi extender like the Aervy can help boost your signal and improve your internet experience. In this article, we'll walk you through the process of  your Aervy WiFi extender setup , step by step, using both the WPS and Web Based methods. We'll also cover how to log in, reset, update firmware, and use your Aervy as an access point.

 Aervy wifi extender setup Via WPS Method

  • Plug in the Aervy wifi extender: Start by plugging in the Aervy wifi extender into a power outlet. Wait for the power LED to turn solid green.
  • Press the WPS button on your router: Locate the WPS button on your router and press it. This will initiate the WPS setup process.
  • Press the WPS button on the Aervy wifi extender: Within two minutes of pressing the WPS button on your router, press the WPS button on the Aervy wifi extender. The power LED will start blinking.
  • Wait for the connection to be established: Once the power LED on the Aervy wifi extender turns solid green, the connection has been successfully established. You can now unplug the Aervy wifi extender and place it in a location where you need to extend the wifi coverage.

Aervy wifi extender setup Via Web-Based Method

  • Connect to the Aervy wifi extender: Start by connecting your computer or mobile device to the Aervy wifi extender's network. The default network name (SSID) and password can be found on the label on the bottom of the Aervy wifi extender.
  • Open a web browser: Open a web browser on your computer or mobile device and enter 192.168.10.1 in the address bar. Press Enter to access the Aervy wifi extender's web-based setup page.
  • Log in to the Aervy wifi extender: Enter the default username and password (admin/admin) to log in to the Aervy wifi extender's web-based setup page.
  • Configure the Aervy wifi extender: Follow the on-screen instructions to configure the Aervy wifi extender's settings, such as the network name (SSID) and password.
  • Save the settings: Once you have configured the Aervy wifi extender's settings, click on the "Save" button to save the changes.

How to Login to Aervy wifi extender ?

To log in to the Aervy wifi extender setup,follow these steps:

  • Connect to the Aervy wifi extender's network: Start by connecting your computer or mobile device to the Aervy wifi extender's network. The default network name (SSID) and password can be found on the label on the bottom of the Aervy wifi extender.
  • Open a web browser: Open a web browser on your computer or mobile device and enter 192.168.10.1 in the address bar. Press Enter to access the Aervy wifi extender's web-based setup page.
  • Log in to the Aervy wifi extender: Enter the default username and password (admin/admin) to log in to the Aervy wifi extender's web-based setup page.

How to RESET Aervy wifi extender?

To reset the Aervy wifi extender to its factory default settings, follow these steps:

  • Locate the RESET button: The RESET button is usually located on the bottom or back of the Aervy wifi extender. Use a paperclip or a similar object to press and hold the RESET button for 10 seconds.
  • Wait for the Aervy wifi extender to restart: After 10 seconds, release the RESET button and wait for the Aervy wifi extender to restart. The power LED will start blinking.
  • Reconfigure the Aervy wifi extender: Once the Aervy wifi extender has restarted, you will need to reconfigure its settings, such as the network name (SSID) and password.

How to Firmware update Aervy wifi extender?

To update the firmware of the Aervy wifi extender, follow these steps:

  • Connect to the Aervy wifi extender's network: Start by connecting your computer or mobile device to the Aervy wifi extender's network. The default network name (SSID) and password can be found on the label on the bottom of the Aervy wifi extender.
  • Open a web browser: Open a web browser on your computer or mobile device and enter 192.168.10.1 in the address bar. Press Enter to access the Aervy wifi extender's web-based setup page.
  • Log in to the Aervy wifi extender: Enter the default username and password (admin/admin) to log in to the Aervy wifi extender's web-based setup page.
  • Check for firmware updates: Once logged in, navigate to the "Firmware Update" section of the Aervy wifi extender's web-based setup page. Click on the "Check for Updates" button to check if there are any firmware updates available.
  • Download and install the firmware update: If a firmware update is available, click on the "Download" button to download the firmware update file. Once downloaded, click on the "Install" button to install the firmware update.
  • Wait for the firmware update to complete: The Aervy wifi extender will restart automatically after the firmware update is complete. The power LED will start blinking.

How to access point Aervy wifi extender?

To use the Aervy wifi extender as an access point, follow these steps:

  • Connect the Aervy wifi extender to your router: Start by connecting the Aervy wifi extender to your router using an Ethernet cable. Plug one end of the Ethernet cable into the LAN port on the Aervy wifi extender and the other end into an available LAN port on your router.
  • Power on the Aervy wifi extender: Plug in the Aervy wifi extender into a power outlet and wait for the power LED to turn solid green.
  • Access the Aervy wifi extender's web-based setup page: Open a web browser on your computer or mobile device and enter 192.168.10.1 in the address bar. Press Enter to access the Aervy wifi extender's web-based setup page.
  • Log in to the Aervy wifi extender: Enter the default username and password (admin/admin) to log in to the Aervy wifi extender's web-based setup page.
  • Configure the Aervy wifi extender as an access point: Once logged in, navigate to the "Access Point" section of the Aervy wifi extender's web-based setup page. Follow the on-screen instructions to configure the Aervy wifi extender as an access point.